FIBSEAL 高韧性纤维堵漏剂 High-Toughness Fiber Leak Sealer

简介Introduction

FIBSEAL高韧性纤维是一种具有一定强度的惰性纤维材料,结构上,该纤维中部为空心状态,粗细分布不均匀,纤维表面有较多微细凹槽,在漏失时,易于流入裂缝中,不产生封门,同时吸附堵漏浆中其他固相,从而在缝内形成较好的封堵。

FIBSEAL high-toughness fiber is an inert fibrous material with a certain degree of strength. Structurally, the fiber has a hollow center, an uneven thickness distribution, and numerous fine grooves on its surface. During leakage, these fibers easily flow into the fractures without causing blockage at the entrance. Simultaneously, they adsorb other solid phases in the leak-sealing slurry, thereby forming an effective seal within the fractures.

性能及优点Performance and advantages

推荐加量:0.2~2.0%

其抗温性较好,抗温达到200℃以上;

易于侵入裂缝,以免封门,能吸附固相,促进封堵屏障的形成。

Recommended dosage: 0.2-2.0%;

It exhibits good temperature resistance, capable of withstanding temperatures above 200℃;

It easily penetrates into fractures without causing blockage at the entrance, and can adsorb solid phases to facilitate the formation of a sealing barrier.

技术参数Technical Parameters

项目Item

技术指标Technical Index

外观Appearance

细长纤维状slender and fibrous

单丝直径Monofilament Diameterμm

5.0-7.0

抗拉强度Tensile StrengthGPa

3.5-4.9

抗拉强度模量Tensile ModulusGPa

230.0-430.0

包装Packaging

采用三合一复合牛皮纸袋包装,内衬防水塑料薄膜,可根据用户需求提供50kg25kg两种分装规格。

The product is packaged in triple-layer composite kraft paper bags with waterproof plastic film liners, and is available in two packaging specifications: 50kg and 25kg, according to customer requirements.


FIBSEAL 高韧性纤维堵漏剂 High-Toughness Fiber Leak Sealer