HarMUL 油基主乳化剂 HarMUL Oil-based Primary Emulsifier
简介Introduction
HarMUL采用创新的分子设计与合成工艺，是人工合成的具有多活性官能团的表面活性剂，具备优异的乳化性能，可形成稳定的油包水型乳状液，单剂使用成本较传统乳化剂更具优势。
HarMUL, developed through cutting-edge molecular design and synthesis technologies, is a synthetically produced surfactant with multiple surface-active groups. It exhibits excellent emulsifying performance, capable of forming stable water-in-oil emulsions, and its unit cost is relatively lower compared to conventional emulsifiers.
性能及优点Performance and Advantages
l 推荐加量：3%~5%；
l 成本较低：较常规乳化剂价格低，配制成本相对较低；
l 抗温性能较好：体系抗温达150℃，粘切适中，破乳电压600V以上，高温高压滤失量小于3.0mL；
l 抗污染性优异：体系抗污染性能良好，抗钻屑、地层水、压裂液等能力良好。
l Recommended dosage: 3% to 5%;
l Cost-effective: It has a lower price compared to conventional emulsifiers, resulting in relatively lower formulation costs;
l Good temperature resistance: The system can withstand temperatures up to 150℃, with moderate viscosity and plastic viscosity, a demulsification voltage exceeding 600V, and a high-temperature high-pressure fluid loss of less than 3mL;
l Excellent pollution resistance: The system demonstrates good resistance to contamination, including resistance to drill cuttings, formation water, fracturing fluids, etc.
技术参数Technical Parameters
项目Item | 技术指标Technical Index | |
外观Appearance | 可流动液体flowable liquid | |
密度Density(20°C)/(g/cm) | 0.90-1.00 | |
倾点Pour Point/(℃) | ≤-10 | |
pH | 5.0-8.0 | |
乳化率Emulsification Rate/（%） | 热滚前Before Hot Rolling | ≥90.0 |
热滚后After Hot Rolling | ≥90.0 | |
破乳电压Emulsion Breaking Voltage/（50℃，V) | 热滚前Before Hot Rolling | ≥500 |
热滚后After Hot Rolling | ≥500 | |
包装Packaging
采用镀锌桶或塑料桶包装，包装牢固、密封良好，可根据用户需求提供200L、50L两种分装规格。
The product is packaged in galvanized or plastic drums that are securely sealed. It is available in 200L and 50L sizes, packaged according to customer requirements.
